Today's Message Index:
----------------------
1. 11:44 AM - Re: Pulsar 3 cowling needed (HUGH COULTER)
2. 11:56 AM - Re: Pulsar 3 cowling needed (Matt Brock)
3. 12:00 PM - Re: Pulsar 3 cowling needed (n3300p@gmail.com)
4. 03:01 PM - Re: Pulsar 3 cowling needed (alan sandul)
5. 06:46 PM - Pulsar reunion (GREGSMI@aol.com)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Pulsar 3 cowling needed |
The series 3 can take a Jabaru 6 at 120 HP. Jabaru had a
firewall forward kit for this engine. With this engine
cruse speed will be about 190 MPH.
Clarke
On Tue, 7 Apr 2015 19:28:31 -0700
"Edfrommi" <Edchuss@comcast.net> wrote:
><Edchuss@comcast.net>
>
> Hello all,
> I'm the proud new owner of a pulsar 3 that is about 20%
>complete. Almost all the pieces are there but the
>firewall forward kit is not. Its a tail wheel version and
>I am favoring the Rotax 912ul. If anyone knows where I
>can find any or all of these pieces please help me out!
> Thanks in advance!
> Ed
>
>
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=440417#440417
>
>
>
>
>
>
>
>Un/Subscription,
>Forums!
>Admin.
>
>
>
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Pulsar 3 cowling needed |
I have a manual for install of the rotax 914 turbo engine in this airframe.
Let me know if you want it.
26 years of flying and there's no such thing as too much horsepower......
Regards,
Matt.
Original Message
From: HUGH COULTER
Sent: Wednesday, 8 April 2015 22:48
Reply To: pulsar-list@matronics.com
Subject: Re: Pulsar-List: Pulsar 3 cowling needed
The series 3 can take a Jabaru 6 at 120 HP. Jabaru had a
firewall forward kit for this engine. With this engine
cruse speed will be about 190 MPH.
Clarke
On Tue, 7 Apr 2015 19:28:31 -0700
"Edfrommi" <Edchuss@comcast.net> wrote:
><Edchuss@comcast.net>
>
> Hello all,
> I'm the proud new owner of a pulsar 3 that is about 20%
>complete. Almost all the pieces are there but the
>firewall forward kit is not. Its a tail wheel version and
>I am favoring the Rotax 912ul. If anyone knows where I
>can find any or all of these pieces please help me out!
> Thanks in advance!
> Ed
>
>
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=440417#440417
>
>
>
>
>
>
>
>Un/Subscription,
>Forums!
>Admin.
>
>
>
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Pulsar 3 cowling needed |
I have a complete FWF kit for a Rotax 912 for a Series II Pulsar which I understand
to be dimensionally the same as a Series III.
It's been several years in storage but as I recall it includes two radiators, engine
mount maybe oil cooler upper and lower cowls
I also have a FWF for a 2200 Jabiru with corks and engine mount.
Let me know if interested.
n3300p@gmail.com
Regards,
Ned Thomas
On Apr 7, 2015, at 9:28 PM, Edfrommi <Edchuss@comcast.net> wrote:
Hello all,
I'm the proud new owner of a pulsar 3 that is about 20% complete. Almost all the
pieces are there but the firewall forward kit is not. Its a tail wheel version
and I am favoring the Rotax 912ul. If anyone knows where I can find any or
all of these pieces please help me out! Thanks in advance!
Ed
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=440417#440417
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Pulsar 3 cowling needed |
Ed,I have a PulsarIII that I purchased built but with only 96hrs on it and
the manual is for Pulsar II-III as they were just changing to the III serie
s.It would appear that engine mounting for the 912 would be the same for bo
th. The manual shows the engine being the 912 turbo. Your welcome to any in
fo out of the manual you may need.I have never seen a Jabiru in the Pulsar
personally but I would do some research on the Jabiru before I would purcha
se. There have been some strange issues with the engines. =C2-Sounds like
Ned has everything you may need.The Pulsar I bought was not completed prop
erly and it took me 3 years of part time work to get it completed properly.
Any questions you may have I would be happy to offer any advice I can. Fuel
tank leakage has been a curse.Good luck,Alan
On Wednesday, April 8, 2015 3:07 PM, "n3300p@gmail.com" <n3300p@gmail.
com> wrote:
I have a complete FWF kit for a Rotax 912 for a Series II Pulsar which I un
derstand to be dimensionally the same as a Series III.
It's been several years in storage but as I recall it includes two radiator
s, engine mount maybe oil cooler upper and lower cowls
I also have a FWF for a 2200 Jabiru with corks and engine mount.
Let me know if interested.
n3300p@gmail.com
Regards,
Ned Thomas
On Apr 7, 2015, at 9:28 PM, Edfrommi <Edchuss@comcast.net> wrote:
Hello all,
I'm the proud new owner of a pulsar 3 that is about 20% complete. Almost al
l the pieces are there but the firewall forward kit is not. Its a tail whee
l version and I am favoring the Rotax 912ul. If anyone knows where I can fi
nd any or all of these pieces please help me out!=C2- Thanks in advance!
Ed
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=440417#440417
S -
-
=C2- =C2- =C2- =C2- =C2- -Matt Dralle, List Admin.
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
We are continuing with plans for the Pulsar gathering May 28 - 31. The
registration is disappointing, but we are going to have a great party so please
get your registration into me quickly.
Unfortunately, the numbers do not justify bringing in Dean Vogel for Rotax.
There is no way we can pay his expenses, but we will have plenty of
expertise to answer your questions and many aircraft to show.
Looking forward to seeing everyone.
Greg
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|