Today's Message Index:
----------------------
1. 07:32 AM - Fw: FW: Enq Pulsar 1 (Sonja Englert)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Fwd: FW: Enq Pulsar 1 |
Hello Group,
Can anyone help with this?
Sonja
---------- Forwarded message ---------
From: Flypiper <flypiper@telkomsa.net>
Subject: RE: FW: Enq Pulsar 1
Hi Sonja,
Trust all well.
Can you poss assist or lead me in the right direction I need an exh system
for the 582 Rotax that im busy fitting to my Pulsar 1.
Being a 2 stroke i know its got to be manufactured for that specifick
engine.
Had a look at the mikrolight system but it is to bulky.
Thanks for your time.
Kind regards,
Kaz.
*From:* Sonja Englert [mailto:paqs345@gmail.com]
*Sent:* 05 Augustus 2018 01:04 AM
*To:* Flypiper
*Subject:* Re: FW: Enq Pulsar 1
Kaz,
I have attached the invoice for the Pulsar plans as requested. I hope this
will work.
Sonja
On Tue, Jul 31, 2018 at 1:20 AM, Flypiper <flypiper@telkomsa.net> wrote:
Hi Sonja ,
Thanks a lot for providing me with the plans youve saved my project, will
keep you informed on the progress.
Will you please compile a invoice for me on the purchase of plans to enable
me to get a building number from our local CAA and if you can supply me
with a serial no .
Detail for invoice.
Kasselman B.
Hangar D 4 Tempe Airfield.
Bloemfontein
South Africa.
To read more or less,
Set of Building plans to copnstruct Pulsar P1. Included pilot operating
handbook and Aircraft Flight manual.
Serial no
Thanks for you assistance and help,
Kaz.
*From:* Sonja Englert [mailto:paqs345@gmail.com]
*Sent:* 30 Julie 2018 01:57 PM
*To:* Flypiper
*Subject:* Re: FW: Enq Pulsar 1
You should also have received the fuselage manual. I have attached it again
to this message.
Sonja
On Mon, Jul 30, 2018 at 1:56 AM, Flypiper <flypiper@telkomsa.net> wrote:
Hi Sonja,
Thanks for your time, i received.
1 Pulsar Wing Construction
2 Pilot operating Handbook.
3 Pulsar 912 Eng instalation Book.
If any outstanding please forward,
Regards Kaz.
*From:* Sonja Englert [mailto:paqs345@gmail.com]
*Sent:* 30 Julie 2018 12:40 AM
*To:* Flypiper
*Subject:* Re: FW: Enq Pulsar 1
On Sunday, July 29, 2018, Flypiper <flypiper@telkomsa.net> wrote:
> Hi Sonja,
>
>
> Trust all well, will you please check in your acount for the funds that
were transfered.
>
>
> RegardsKAZ.
>
>
> From: Sonja Englert [mailto:paqs345@gmail.com]
> Sent: 12 Julie 2018 03:55 PM
> To: Jaco v/d Merwe; Flypiper
> Subject: Re: FW: FW: Enq Pulsar 1
>
>
> Hello Jaco, Kaz,
>
>
> Here is my account information. I hope it works.
>
>
> Beneficiary:
>
> Sonja Englert, 379 Sunset St, San Andreas, CA 95249, USA
<https://maps.google.com/?q=379+Sunset+St,+San+Andreas,+CA+95249,+USA&ent
ry=gmail&source=g>
>
>
> Bank: Wells Fargo Account No. 528-242-1782
>
> Routing No. 121000248 Swift Code: WFBIUS6S
>
> PO. Box 6995, Portland, OR 97228
>
>
> Thanks,
>
>
> Sonja
>
>
> On Wed, Jul 11, 2018 at 10:53 PM, Jaco v/d Merwe <jaco747@gmail.com>
wrote:
>
> Dear Sonja,
>
>
> Could you please provide us with your bank details. I will arrange for an
EFT from PNC bank.
>
>
> Kaz can then just refund me in SA.
>
>
> Brgds
>
> Jaco
>
>
> On 11 July 2018 at 21:09, Flypiper <flypiper@telkomsa.net> wrote:
>
> Hi Jakes,
>
>
> Maak die oorbetaling tegniek sin vir jou ?
>
>
> Groete.
>
>
> From: Sonja Englert [mailto:paqs345@gmail.com]
> Sent: 11 Julie 2018 02:03 PM
> To: Flypiper
> Subject: Re: FW: Enq Pulsar 1
>
>
> Hi Kaz,
>
>
> The files are only available in electronic format, so I will send them by
email once I receive the payment. People from other countries usually use
Paypal for sending money. Anything else would be difficult. Use my email
address to send payment $25 US (paqs345@gmail.com).
>
>
> What serial number is your Pulsar? Mine is 298, which is one of the early
XP's, so yours should be a lower number than this.
>
>
> Sonja
>
>
> On Tue, Jul 10, 2018 at 10:05 AM, Flypiper <flypiper@telkomsa.net> wrote:
>
> Hi Sonja,
>
>
> Thanks for your (Snappy) reply highly apreciated.
>
> By the looks of things youve got everything to enable me to rebuilt the
Pulsar, have you got records of the last serial no that was alocated please
.
>
> Will you forward me your bank detail and the total amount to you
including courier cost please.
>
> Thanks for your assistance.
>
>
> Regards Kaz.
>
>
> From: Sonja Englert [mailto:paqs345@gmail.com]
> Sent: 10 Julie 2018 07:49 AM
> To: Flypiper
> Subject: Re: FW: Enq Pulsar 1
>
>
> Hi Kaz,
>
>
> The Pulsar 1 can only use a 582 Rotax or possibly a Jabiru 2200 engine,
not just for cg but also weight reasons because it has a lower gross weight
than later Pulsar models.
>
>
> I have a pilot's operating handbook for a Pulsar XP with Rotax 912 and
the other construction manuals for this model. It includes some information
for the earlier models with wood wing.
>
> I have scanned my builder=99s manuals and added my notes and descri
ptions
to them so that they are available to other Pulsar owners and builders.
>
> There are 4 files covering the construction (Fuselage, wing and engine,
pdf) and a flight manual as a Word document so it can be used as a template
and be customized for each individual Pulsar. The flight manual also
contains observations and advice on the flight characteristics of the
Pulsar.
>
> I sell the files for $25.
>
>
> Sonja
>
>
> On Mon, Jul 9, 2018 at 8:19 PM, Flypiper <flypiper@telkomsa.net> wrote:
>
>
> From: Flypiper [mailto:flypiper@telkomsa.net]
> Sent: 09 Julie 2018 08:02 PM
> To: paqs345@gmail.com
> Subject: Enq Pulsar 1
>
>
> Hi Sonja ,
>
>
> Ive been refered to you by Clayton a Pulsar owner in S A.
>
> Can you poss assist me, I bought a Pulsar basket case and wants to
rebuild it to origional it is the P1 with the feul tank in the fuss up
front and no wing tanks.
>
> I was told that you can only fit a 582 Rotax to this airframe and not the
912 because of C of G problems.
>
> Is it possible to supply me with drawing plans of this aircraft and
pilots operating handbook or something simmalor owners handbook?
>
>
> Thanks for your time.
>
>
> Kaz
>
> Bloemfontein.
>
> South Africa
>
>
>Hi,
I am traveling at the moment. I will check when I get the chance.
Sonja
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|