Today's Message Index:
----------------------
1. 08:56 AM - Rotax 912 ignition modules (Sonja Englert)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Rotax 912 ignition modules |
Hi Guys,
I had some problems with my engine for a while, it just did not seem to put
out full power anymore (engine is from 1995). I replaced a number of
ignition components, among them the coils and electronic ignition modules,
and it made a big difference. It is running good again.
I found this company that makes ignition system parts:
www.ignitech.cz/
I installed their Rotax replacement ignition modules and am very happy with
them. First of all, they cost <<< than the Rotax parts, they provide a
wiring harness with the same connectors as Rotax, with custom length so
that they don't have to be installed on top of the engine where they get
fried and they allow using battery power for starting, which means my
engine now starts with the first turn of the prop, regardless on how slow
the starter cranks.
I installed the new modules in my Pulsar on the cabin side of the firewall,
with 2 new switches for battery power. The installation added about 1 lb of
weight, but it is well worth it.
Sonja
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|