Today's Message Index:
----------------------
1. 05:15 AM - Re: RV9-List Digest: 2 Msgs - 09/03/06 (Richard Garforth)
2. 01:24 PM - Re: Re:Vor Antenna (Folbrecht, Paul)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: RV9-List Digest: 2 Msgs - 09/03/06 |
--> RV9-List message posted by: "Richard Garforth" <richard@hawk.flyer.co.uk>
Wayne,
I used the Commant V ant. I think the number is Cl 505. It fits and works
fine and you can point the wiskers the rear and it clears the rudder OK.
Richard
----- Original Message -----
From: "RV9-List Digest Server" <rv9-list@matronics.com>
Sent: Monday, September 04, 2006 7:57 AM
Subject: RV9-List Digest: 2 Msgs - 09/03/06
> *
>
> =================================================
> Online Versions of Today's List Digest Archive
> =================================================
>
> Today's complete RV9-List Digest can also be found in either of the
> two Web Links listed below. The .html file includes the Digest formatted
> in HTML for viewing with a web browser and features Hyperlinked Indexes
> and Message Navigation. The .txt file includes the plain ASCII version
> of the RV9-List Digest and can be viewed with a generic text editor
> such as Notepad or with a web browser.
>
> HTML Version:
>
>
> http://www.matronics.com/digest/rv9-list/Digest.RV9-List.2006-09-03.html
>
> Text Version:
>
> http://www.matronics.com/digest/rv9-list/Digest.RV9-List.2006-09-03.txt
>
>
> ===============================================
> EMail Version of Today's List Digest Archive
> ===============================================
>
>
> ----------------------------------------------------------
> RV9-List Digest Archive
> ---
> Total Messages Posted Sun 09/03/06: 2
> ----------------------------------------------------------
>
>
> Today's Message Index:
> ----------------------
>
> 1. 05:08 AM - Re:Vor Antenna (Russ & Marilyn)
> 2. 05:08 AM - Re:Vor Antenna (Russ & Marilyn)
>
>
> ________________________________ Message 1
> _____________________________________
>
>
> Time: 05:08:26 AM PST US
> From: "Russ & Marilyn" <rmkeith@gwi.net>
> Subject: RV9-List: Re:Vor Antenna
>
> Wayne,
>
> I installed an Omni antenna on the top of the vertical stabilizer. I an
> still in the building process so I cant comment on how well it works. I
> got mine from Wag-Aero part number C-173-000. The mounting block is a
> tapered block of plastic and is tapered to fit the general shape of the
> fiberglass cap of the VS. I have mine with the antennas pointing forward
> because of interference with the rudder counterweight. I have some
> pictures if you like.
>
> Russ Keith
> RV9A slow build
> rv9a@gwi.net
>
>
> ----- Original Message -----
> From: Wayne
> To: rv9-list@matronics.com
> Sent: Saturday, September 02, 2006 5:17 AM
> Subject: Re: RV9-List: Re: RV9-List Digest: 1 Msgs - 08/29/06
>
>
> The antenna base (hockey puck) I have is wider than the top of the
> rudder. Did you cut a notch and let a half inch hang out on either side?
> Thanks again for your time.
> Wayne
> ----- Original Message -----
> From: Larry Rush
> To: rv9-list@matronics.com
> Sent: Thursday, August 31, 2006 5:15 PM
> Subject: RV9-List: Re: RV9-List Digest: 1 Msgs - 08/29/06
>
>
> I put mine and two others on top of the vertical stab.
>
>
> ________________________________ Message 2
> _____________________________________
>
>
> Time: 05:08:29 AM PST US
> From: "Russ & Marilyn" <rmkeith@gwi.net>
> Subject: RV9-List: Re:Vor Antenna
>
> Wayne,
>
> I installed an Omni antenna on the top of the vertical stabilizer. I an
> still in the building process so I cant comment on how well it works. I
> got mine from Wag-Aero part number C-173-000. The mounting block is a
> tapered block of plastic and is tapered to fit the general shape of the
> fiberglass cap of the VS. I have mine with the antennas pointing forward
> because of interference with the rudder counterweight. I have some
> pictures if you like.
>
> Russ Keith
> RV9A slow build
> rv9a@gwi.net
>
>
> ----- Original Message -----
> From: Wayne
> To: rv9-list@matronics.com
> Sent: Saturday, September 02, 2006 5:17 AM
> Subject: Re: RV9-List: Re: RV9-List Digest: 1 Msgs - 08/29/06
>
>
> The antenna base (hockey puck) I have is wider than the top of the
> rudder. Did you cut a notch and let a half inch hang out on either side?
> Thanks again for your time.
> Wayne
> ----- Original Message -----
> From: Larry Rush
> To: rv9-list@matronics.com
> Sent: Thursday, August 31, 2006 5:15 PM
> Subject: RV9-List: Re: RV9-List Digest: 1 Msgs - 08/29/06
>
>
> I put mine and two others on top of the vertical stab.
>
>
> --
> This message has been scanned for viruses and
> dangerous content by MailScanner, and is
> believed to be clean.
>
>
>
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Where did you run the wire? Thru the VS?
________________________________
From: owner-rv9-list-server@matronics.com
[mailto:owner-rv9-list-server@matronics.com] On Behalf Of Russ & Marilyn
Sent: Sunday, September 03, 2006 7:06 AM
Subject: RV9-List: Re:Vor Antenna
Wayne,
I installed an Omni antenna on the top of the vertical stabilizer. I an
still in the building process so I cant comment on how well it works. I
got mine from Wag-Aero part number C-173-000. The mounting block is a
tapered block of plastic and is tapered to fit the general shape of the
fiberglass cap of the VS. I have mine with the antennas pointing forward
because of interference with the rudder counterweight. I have some
pictures if you like.
Russ Keith
RV9A slow build
rv9a@gwi.net
<mailto:Rv9a@gwi.net>
----- Original Message -----
From: Wayne <mailto:wowens@darientel.net>
To: rv9-list@matronics.com
Sent: Saturday, September 02, 2006 5:17 AM
Subject: Re: RV9-List: Re: RV9-List Digest: 1 Msgs - 08/29/06
The antenna base (hockey puck) I have is wider than the top of
the rudder. Did you cut a notch and let a half inch hang out on either
side?
Thanks again for your time.
Wayne
----- Original Message -----
From: Larry Rush <mailto:k9hxt@sbcglobal.net>
To: rv9-list@matronics.com
Sent: Thursday, August 31, 2006 5:15 PM
Subject: RV9-List: Re: RV9-List Digest: 1 Msgs -
08/29/06
I put mine and two others on top of the vertical stab.
.com/Navigator?RV9-List
This transmission contains information for the exclusive use of the
intended recipient and may be privileged, confidential and/or otherwise
protected from disclosure. Any unauthorized review or distribution is
strictly prohibited. Stark Investments is required to retain electronic
mail messages, which may be produced at the request of regulators or in
connection with litigation. Electronic messages cannot be guaranteed to
be secure, timely or error-free. As such, we recommend that you do not
send confidential information to us via electronic mail. This
communication is for informational purposes only and is not an offer or
solicitation to buy or sell any investment product. Any information
regarding specific investment products is subject to change without
notice. If you received this transmission in error, please notify the
sender immediately by return e-mail and delete this message and any
attachments from your system.
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|