Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

static line routing?

Matronics Email Lists Forum Index -> RV7-List

View previous topic :: View next topic

Author Message

dhall(at)donka.net
Guest

Posted: Thu Apr 19, 2007 9:45 pm Post subject: static line routing?

I still have to do this step, and I'm about to paint the interior.    

Is this article online somewhere?  Or does someone have the  

dimensions noted?

On Dec 10, 2006, at 7:25 PM, Greg Vouga wrote:

[quote] 

 There is an article in the RVator (1st issue, 2006) detailing how  

 and where to rout the line through the cabin.  The only hole you  

 will need to add is the one in the F-704 seatback bulkhead.  They  

 recommend drilling a hole under the longeron just big enough to  

 pass the plastic static tubing through.  No bushing is required.   

 If I remember correctly, the other holes are already punched in the  

 ribs from Van's.  The punched holes are the correct size for bushings.

 Greg

 Raleigh, NC

 RV-7 Wiring

> From: "LarryRobertHelming" <lhelming(at)sigecom.net>

> Reply-To: rv7-list(at)matronics.com

> To: <rv7-list(at)matronics.com>

> Subject: Re: static line routing?

> Date: Sat, 9 Dec 2006 20:46:50 -0600

>

> 

> <lhelming(at)sigecom.net>

>

> You route that forward just along/below the longerons on the pilot  

> side of the plane.  There are some holes already opened for you to  

> route the line through.  Indiana Larry

> ---

- The Matronics RV7-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV7-List

Bob Collins

Joined: 11 Mar 2006
Posts: 470
Location: St. Paul, Minnesota

Posted: Fri Apr 20, 2007 4:44 am Post subject: static line routing?

It's in the FILES section on the Yahoogrooup. Seatback bulkhead, by the way,

is 705. 



--

- The Matronics RV7-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV7-List

_________________
Bob Collins
St. Paul, Minn.
Letters from Flyover Country
http://rvnewsletter.blogspot.com/

dhall(at)donka.net
Guest

Posted: Fri Apr 20, 2007 6:17 am Post subject: static line routing?

The "rv7 or 7a" group? Just submitted to that one, but there were several rv

groups on yahoo.



******************************************

 Don Hall                  

 N517DG (registered)  

 rv7 fuselage

 http://rv7.donka.net

******************************************



--

- The Matronics RV7-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV7-List

Bob Collins

Joined: 11 Mar 2006
Posts: 470
Location: St. Paul, Minnesota

Posted: Fri Apr 20, 2007 6:51 am Post subject: static line routing?

Here you go



http://groups.yahoo.com/group/RV7A/files/Newsletters%20and%20publications/



I also recall putting some pix in the photo section the last time this came

up but this morning I see Yahoo's photo section is up to its usual level of

dependability. I'll go snap some more before I head off to work and post 'em

here (if I can figure out how)



Bob 



--

- The Matronics RV7-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV7-List

_________________
Bob Collins
St. Paul, Minn.
Letters from Flyover Country
http://rvnewsletter.blogspot.com/

Bob Collins

Joined: 11 Mar 2006
Posts: 470
Location: St. Paul, Minnesota

Posted: Fri Apr 20, 2007 7:24 am Post subject: Re: static line routing?

Don, I just put some pictures and copy here.



http://rvhotline.expercraft.com/articles/2007/static_line_routing.html

- The Matronics RV7-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV7-List

_________________
Bob Collins
St. Paul, Minn.
Letters from Flyover Country
http://rvnewsletter.blogspot.com/

Bob Collins

Joined: 11 Mar 2006
Posts: 470
Location: St. Paul, Minnesota

Posted: Fri Apr 20, 2007 10:23 am Post subject: Re: static line routing?

Oh dear, the email version didn't have the link. I'm an idiot.



Let's see if this goes through.



http://rvhotline.expercraft.com/articles/2007/static_line_routing.html

- The Matronics RV7-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV7-List

_________________
Bob Collins
St. Paul, Minn.
Letters from Flyover Country
http://rvnewsletter.blogspot.com/

dhall(at)donka.net
Guest

Posted: Wed Apr 25, 2007 6:01 pm Post subject: static line routing?

You da man, Bob.  Thanks! 

******************************************

 Don Hall                  

 N517DG (registered)  

 rv7 fuselage

 http://rv7.donka.net

******************************************



--

- The Matronics RV7-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV7-List

Display posts from previous:

	Matronics Email Lists Forum Index -> RV7-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum