Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Electro Cleaning

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> CorvairEngines-List
View previous topic :: View next topic  
Author Message
LHusky



Joined: 19 Jun 2008
Posts: 86
Location: Madras, Oregon

PostPosted: Sun Jun 29, 2008 6:33 pm    Post subject: Electro Cleaning Reply with quote

I am trying the electrolytic rust removal system on a rusted up rear case. It is so rusted, I cannot remove any bolts to get to the oil pump gears. If I do, they will break. This is a bad case to begin with. I made 2 electrodes and connected them with a pair of jumper cables. I then made up 3 gallons of water and baking soda. I put everything in a plastic bucket and hooked up a battery charger to it. I connected the red lead from the battery charger to the 2 electrodes in the water. These 2 electrodes are not touching the part that is being cleaned. I then hooked the negative terminal from the battery charger to the part itself. I then plugged in the charger.  I confirmed that I had a current through the 2 electrodes to the negative post on the part. I had a current! After a few minutes, I had a bubble action starting to come from the part. A few minutes later, I began seeing rust floating on top of the water. It is really starting to bubble and this may work! The web site I was on said that you can not over clean the part and that it will not do anything to the metal, so since this is a bad case, I am going to leave it in all night and see what it looks like in the morning. If this works, I am going to buy a tub to put my whole engine in and get it rust free and hopefully unfrozen, so I can disassemble it. We will see. I will keep you updated on this. I will see if the bolts on this case can be undone after this process. That will tell the tale!

Larry Husky
Madras, Oregon

Gas prices getting you down? Search AOL Autos for fuel-efficient used cars.
[quote][b]


- The Matronics CorvairEngines-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?CorvairEngines-List
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> CorvairEngines-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group