Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Shop manual

Matronics Email Lists Forum Index -> Commander-List

View previous topic :: View next topic

Author Message

tfisher(at)commandergroup
Guest

Posted: Tue Mar 07, 2006 8:56 am Post subject: Shop manual

Gentlemen,



In reviewing my shop manual for a nose wheel shimmy that I have developed I

discovered that I am missing Page 6-9 & 6-10 from my manual.

Would someone be able to fax/Email me these two pages?



Tom F.

Voice: 604-649-9320

Fax: 604-274-1281

Eamil: tfisher(at)commandergroup.bc.ca



---

YOURTCFG(at)aol.com
Guest

Posted: Tue Mar 07, 2006 10:26 am Post subject: Shop manual

In a message dated 3/7/2006 8:57:01 AM Pacific Standard Time,  

tfisher(at)commandergroup.bc.ca writes:

In  reviewing my shop manual for a nose wheel shimmy that I have  developed

Tom.  The shimmy is from the brake shoe tension on the strut.   There are 

shims that set the spacing and tension of these.  Over the  years, the shoes wear 

and allow for a lack of tension.  Simply remove the  friction brake by 

loosening the two #3 bolts, remove the brake shoes and  springs.  Reassemble, 

leaving on shim removed and you will be  OK.  Or, you can do what I do.  Buy some 

disc brake cleaner in an  aerosol can form the local auto parts store.  

Liberally spray the friction  brake and watch all of the old good run out.  When the 

can is empty, the  cleaning id complete and the shimmy will almost certainly be 

gone for at leas  another year.  I do have those pages and can fax them this 

evening if you  send you fax number.  Good luck (Ps, keep at least 45psi in 

the nose  tire).  jb

tfisher(at)commandergroup
Guest

Posted: Tue Mar 07, 2006 12:21 pm Post subject: Shop manual

Thanks for that, I will proceed as described, I would still like to have

that missing page if you would fax it to 604-274-1281 and I thank you again.



Tom F.



---

Jim Addington

Joined: 09 Jan 2006
Posts: 62
Location: Denton, Texas

Posted: Tue Mar 07, 2006 1:54 pm Post subject: Shop manual

Tom,

I can send you pages 9 & 10 from my 500A manual if it would help.



Jim Addington

N444BD



--

tfisher(at)commandergroup
Guest

Posted: Tue Mar 07, 2006 4:39 pm Post subject: Shop manual

No thanks, I would like to bring my 680 manual to completion.

I still have my 500B manual.



Tom F.



---

tfisher(at)commandergroup
Guest

Posted: Wed Mar 08, 2006 7:53 am Post subject: Shop manual

Mason, thanks for faxing those two pages, Tom F.

tfisher(at)commandergroup
Guest

Posted: Tue Mar 14, 2006 11:10 am Post subject: Shop manual

Mason, thanks for faxing those two pages (6-9 & 6-10) to me at

(604-274-1281),

unfortunately these pages are from the "Illistrated parts" book, more on

this in a minute.



What I need are the pages from the "Aircraft Shop Manual" (6-9 & 6-10).

Would you have these pages?



Now, back to the pages you sent me, when I noticed that on the top of the

sheets refered to the "Illistrated parts" book I looked at mine and low and

behold I don't even have "6-" sections  in it ! hmmmmmmmm, will have to look

into that.  If I have any money for "go juice" I will try to make my first

Commander gathering this summer so you guys bring your manuals.



Tom F.

C-GISS

680FLP (Mr.RPM)

tfisher(at)commandergroup
Guest

Posted: Mon Mar 20, 2006 7:47 am Post subject: Shop manual

Gentlemen,



I have not so far been able to locate the missing pages from the "Aircraft

Shop Manual"(6-9 & 6-10).

Can anyone help?



Tom F.

C-GISS

680FLP (Mr.RPM)

aquadiver99(at)yahoo.com
Guest

Posted: Mon Mar 20, 2006 8:07 am Post subject: Shop manual

Morning Tom,

  All I have are 500B books but, if same, will share.

Hope you get what you need. 

Regards,

--- Tom Fisher <tfisher(at)commandergroup.bc.ca> wrote:



 	  Quote: 	
		   

 <tfisher(at)commandergroup.bc.ca>

 

 Gentlemen,

 

 I have not so far been able to locate the missing

 pages from the "Aircraft

 Shop Manual"(6-9 & 6-10).

 Can anyone help?

 

 Tom F.

 C-GISS

 680FLP (Mr.RPM)

 

 

 

 

 

 



 browse

 Subscriptions page,

 FAQ,

 http://www.matronics.com/Navigator?Commander-List



 Admin.



 

 

 

  

  

  

 

 

 

 


	




Donnie Rose

205/492-8444

tfisher(at)commandergroup
Guest

Posted: Mon Mar 20, 2006 9:41 am Post subject: Shop manual

Thanks, I too have a 500B manual but it is not the same, I will keep trying.

Tom F.



---

avtec2(at)bellsouth.net
Guest

Posted: Mon Mar 20, 2006 9:49 am Post subject: Shop manual

Tom  I Have the books you need pages out of

send ne again what you need

Harry

321 267-3141

What about the tear drop beacon

---

avtec2(at)bellsouth.net
Guest

Posted: Mon Mar 20, 2006 9:49 am Post subject: Shop manual

Yes i can

Harry

---

john(at)vormbaum.com
Guest

Posted: Mon Mar 20, 2006 9:53 am Post subject: Shop manual

Tom,



Have you tried Morris Kernick at 321-403-8813? I bet he has the 680FLP 

manual, and I know he'd help you out.



/John

---

tfisher(at)commandergroup
Guest

Posted: Mon Mar 20, 2006 11:06 am Post subject: Shop manual

Thanks Harry, I guess my last Email went astray.

I need the "Shop Manual" pages (6-9 & 6-10).

My fax number is 604-274-1281.

Thanks again, I hope it matches this time, my page 6-11 starts with a

paragraph "J".



Tom F.

---

tfisher(at)commandergroup
Guest

Posted: Mon Mar 20, 2006 11:09 am Post subject: Shop manual

Oh yes, about the tear drop tail light, As I mentioned I want to put a

strobe up there but my idea was to put the strobe inside the teardrop lens

but I guess that is not practical so I will just use the lens that comes

with the strobe (when I buy it that is).



Tom F.



---

dowens(at)aerialviewpoint
Guest

Posted: Wed Mar 22, 2006 10:11 am Post subject: Shop manual

What about those Engine Baffles???

---

Display posts from previous:

	Matronics Email Lists Forum Index -> Commander-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum