Matronics Email Lists :: View topic - instrument panel overlay liquidation

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

instrument panel overlay liquidation

Matronics Email Lists Forum Index -> TeamGrumman-List

View previous topic :: View next topic

Author Message

teamgrumman(at)yahoo.com
Guest

Posted: Thu Aug 18, 2011 2:04 pm Post subject: instrument panel overlay liquidation

I'm in the final steps of getting the instrument panel overlays FAA-PMA approved as a direct replacement.  Problem is, the FAA requires they go out with a chem film plating (alodine) for corrosion resistance.  That means the 20 sets I have left can't be used.

Buy up as many as you want for $100/each including shipping.  That's about $50 savings on each one.  Stock them and sell them yourself.  Not sure how much the PMAd parts will be.



 [quote][b]

michael(at)flightsked.com
Guest

Posted: Thu Aug 18, 2011 2:14 pm Post subject: instrument panel overlay liquidation

Hi Gary,



I'll take one.

 



Thanks,

Michael





Michael W. Meyer

Tiger N74086

San Francisco, CA

michael(at)flightsked.com (michael(at)flightsked.com)

 

  

On Aug 18, 2011, at 3:01 PM, Gary Vogt wrote:

[quote]I'm in the final steps of getting the instrument panel overlays FAA-PMA approved as a direct replacement.  Problem is, the FAA requires they go out with a chem film plating (alodine) for corrosion resistance.  That means the 20 sets I have left can't be used.

Buy up as many as you want for $100/each including shipping.  That's about $50 savings on each one.  Stock them and sell them yourself.  Not sure how much the PMAd parts will be.



  	  Quote: 	
		  

	


[b]

dsleepy47

Joined: 15 Dec 2007
Posts: 41

Posted: Thu Aug 18, 2011 2:48 pm Post subject: instrument panel overlay liquidation

I'll take one

Deems Herring



mailto:dsleepy47(at)hotmail.com

Date: Thu, 18 Aug 2011 15:01:49 -0700

From: teamgrumman(at)yahoo.com

Subject: instrument panel overlay liquidation

To: teamgrumman-list(at)matronics.com



I'm in the final steps of getting the instrument panel overlays FAA-PMA approved as a direct replacement.  Problem is, the FAA requires they go out with a chem film plating (alodine) for corrosion resistance.  That means the 20 sets I have left can't be used.

Buy up as many as you want for $100/each including shipping.  That's about $50 savings on each one.  Stock them and sell them yourself.  Not sure how much the PMAd parts will be.



 [quote]



List" target="_blank">http://www.matronics.com/Navigator?TeamGrumman-List

http://forums.matronics.com

="_blank">http://www.matronics.com/contribution



[b]

_________________
dsleepy47
N1491R

n2_narcosis(at)yahoo.com
Guest

Posted: Thu Aug 18, 2011 3:41 pm Post subject: instrument panel overlay liquidation

what do they look like?



--- On Thu, 8/18/11, Gary Vogt <teamgrumman(at)yahoo.com> wrote:

  	  Quote: 	
		  

From: Gary Vogt <teamgrumman(at)yahoo.com>

Subject: instrument panel overlay liquidation

To: "Teamgrumman List" <teamgrumman-list(at)matronics.com>

Date: Thursday, August 18, 2011, 5:01 PM



   I'm in the final steps of getting the instrument panel overlays FAA-PMA approved as a direct replacement.  Problem is, the FAA requires they go out with a chem film plating (alodine) for corrosion resistance.  That means the 20 sets I have left can't be used.

 



 Buy up as many as you want for $100/each including shipping.  That's about $50 savings on each one.  Stock them and sell them yourself.  Not sure how much the PMAd parts will be.



 	  Quote: 	
		  



st" rel=nofollow target=_blank>http://www.matronics.com/Navigator?TeamGrumman-List

et=_blank>http://forums.matronics.com

llow target=_blank>http://www.matronics.com/contribution



	


	
 [quote][b]

mel(at)becknet.com
Guest

Posted: Thu Aug 18, 2011 5:55 pm Post subject: instrument panel overlay liquidation

Do I need a 337 to install one? What do they look like? (I'm an A&P but not familiar with these overlays). 



-mel via cell



On Aug 18, 2011, at 3:01 PM, Gary Vogt <teamgrumman(at)yahoo.com (teamgrumman(at)yahoo.com)> wrote:



[quote]I'm in the final steps of getting the instrument panel overlays FAA-PMA approved as a direct replacement.  Problem is, the FAA requires they go out with a chem film plating (alodine) for corrosion resistance.  That means the 20 sets I have left can't be used.

Buy up as many as you want for $100/each including shipping.  That's about $50 savings on each one.  Stock them and sell them yourself.  Not sure how much the PMAd parts will be.



  	  Quote: 	
		  

	


[b]

mattd(at)drahz.com
Guest

Posted: Thu Aug 18, 2011 6:01 pm Post subject: instrument panel overlay liquidation

As I was looking at my panel this week - with a F. Kokaska overlay -     I thought to myself how happy I was to buy that years before I     needed it - and how the one thing I would miss on my plane is that     overlay should anything bad happen to the plane.

     

     This is my subtle way of encouraging you to pick up this overlay     today. Don't wait.

     

     I may need to buy another just in case - its that cool.

     

     mattd

     

     / do not archive

     

                 [quote]     [b]

teamgrumman(at)yahoo.com
Guest

Posted: Thu Aug 18, 2011 7:45 pm Post subject: instrument panel overlay liquidation

To all interested,

Send a check for $100 (campaign contribution?) made payable to 

Gary L Vogt

2945 Bell Road #150

Auburn, CA  95603

From: Michael W. Meyer <michael(at)flightsked.com>

To: teamgrumman-list(at)matronics.com

Sent: Thursday, August 18, 2011 3:11 PM

Subject: Re: instrument panel overlay liquidation



Hi Gary,



I'll take one.

 



Thanks,

Michael





Michael W. Meyer

Tiger N74086

San Francisco, CA

michael(at)flightsked.com (michael(at)flightsked.com)

 

  

On Aug 18, 2011, at 3:01 PM, Gary Vogt wrote:

 	  Quote: 	
		  I'm in the final steps of getting the instrument panel overlays FAA-PMA approved as a direct replacement.  Problem is, the FAA requires they go out with a chem film plating (alodine) for corrosion resistance.  That means the 20 sets I have left can't be used.

Buy up as many as you want for $100/each including shipping.  That's about $50 savings on each one.  Stock them and sell them yourself.  Not sure how much the PMAd parts will be.



  	  Quote: 	
		  



	


	
http://www.matronics.com/Navigator?TeamGrumman-List=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D  [/b][b]

teamgrumman(at)yahoo.com
Guest

Posted: Thu Aug 18, 2011 7:51 pm Post subject: instrument panel overlay liquidation

Overlays

From: Brock Windsor <n2_narcosis(at)yahoo.com>

To: teamgrumman-list(at)matronics.com

Sent: Thursday, August 18, 2011 4:39 PM

Subject: Re: instrument panel overlay liquidation

what do they look like?

--- On Thu, 8/18/11, Gary Vogt  <teamgrumman(at)yahoo.com> wrote:

  	  Quote: 	

From: Gary Vogt <teamgrumman(at)yahoo.com>

Subject: TeamGrumman-List: instrument panel overlay liquidation

To: "Teamgrumman List" <teamgrumman-list(at)matronics.com>

Date: Thursday, August 18, 2011, 5:01 PM

   I'm in the final steps of getting the instrument panel overlays FAA-PMA approved as a direct replacement.  Problem is, the FAA requires they go out with a chem film plating (alodine) for corrosion resistance.  That means the 20 sets I have left can't be used.

 Buy up as many as you want for $100/each including shipping.  That's about $50 savings on each one.  Stock them and sell them yourself.  Not sure how much the PMAd parts will be.

 	  Quote: 	

st" rel=nofollow target=_blank>http://www.matronics.com/Navigator?TeamGrumman-List

et=_blank>http://forums.matronics.com

llow target=_blank>http://www.matronics.com/contribution

  	  Quote: 	
		  http://www.matronics.follow" target="_blank" href="http://forums.matronics.com">http://forum==========

PICT0268.JPG

Description:

Filesize:

623.03 KB

Viewed:

10227 Time(s)

PICT0268.JPG

Description:

Filesize:

905.29 KB

Viewed:

10227 Time(s)

PICT0270.JPG

Description:

Filesize:

1.05 MB

Viewed:

10227 Time(s)

teamgrumman(at)yahoo.com
Guest

Posted: Thu Aug 18, 2011 7:51 pm Post subject: instrument panel overlay liquidation

It's an owner produced part.

From: Mel Beckman <mel(at)becknet.com>

To: "teamgrumman-list(at)matronics.com" <teamgrumman-list(at)matronics.com>

Sent: Thursday, August 18, 2011 6:52 PM

Subject: Re: instrument panel overlay liquidation

Do I need a 337 to install one? What do they look like?  (I'm an A&P but not familiar with these overlays). 

-mel via cell

On Aug 18, 2011, at 3:01 PM, Gary Vogt <teamgrumman(at)yahoo.com (teamgrumman(at)yahoo.com)> wrote:

 	  Quote: 	
		  I'm in the final steps of getting the instrument panel overlays FAA-PMA approved as a direct replacement.  Problem is, the FAA requires they go out with a chem film plating (alodine) for corrosion resistance.  That means the 20 sets I have left can't be used.

Buy up as many as you want for $100/each including shipping.  That's about $50 savings on each one.  Stock them and sell them yourself.  Not sure how much the PMAd parts will  be.

  	  Quote: 	

 [quote][b]

BILL9725(at)AOL.COM
Guest

Posted: Thu Aug 18, 2011 8:03 pm Post subject: instrument panel overlay liquidation

Hi Gary

  

 Will have a check in the mail in the morning.  

  

 Bill Stigile 

  

  In a message dated 8/18/2011 8:54:29 P.M. Pacific Daylight Time,  teamgrumman(at)yahoo.com writes:

  	  Quote: 	
		        Overlays

   



            From: Brock Windsor    <n2_narcosis(at)yahoo.com>

To:    teamgrumman-list(at)matronics.com

Sent: Thursday, August 18, 2011 4:39    PM

Subject: Re:    instrument panel overlay liquidation



                       what do they look like?



--- On Thu, 8/18/11,          Gary Vogt <teamgrumman(at)yahoo.com> wrote:

          	  Quote: 	
		  

From:            Gary Vogt <teamgrumman(at)yahoo.com>

Subject: TeamGrumman-List:            instrument panel overlay liquidation

To: "Teamgrumman List"            <teamgrumman-list(at)matronics.com>

Date: Thursday, August 18,            2011, 5:01 PM



                                 I'm in the final steps of getting the instrument panel overlays            FAA-PMA approved as a direct replacement.  Problem is, the FAA            requires they go out with a chem film plating (alodine) for corrosion            resistance.  That means the 20 sets I have left can't be            used.

           



           Buy up as many as you want for $100/each including shipping.             That's about $50 savings on each one.  Stock them and sell            them yourself.  Not sure how much the PMAd parts will            be.



 	  Quote: 	
		  



st" rel=nofollow target=_blank>http://www.matronics.com/Navigator?TeamGrumman-List

et=_blank>http://forums.matronics.com

llow target=_blank>http://www.matronics.com/contribution



	


	
 	  Quote: 	
		  http://www.matronics.follow" target="_blank" href="http://forums.matronics.com">http://forum==========



	




	


 [quote][b]

dsleepy47

Joined: 15 Dec 2007
Posts: 41

Posted: Fri Aug 19, 2011 1:45 am Post subject: instrument panel overlay liquidation

Will be in the mail tomorrow.

Deems Herring



Date: Thu, 18 Aug 2011 20:42:50 -0700

From: teamgrumman(at)yahoo.com

Subject: Re: instrument panel overlay liquidation

To: teamgrumman-list(at)matronics.com



To all interested,

Send a check for $100 (campaign contribution?) made payable to 

Gary L Vogt

2945 Bell Road #150

Auburn, CA  95603

    



 		 	   		  

  [quote][b]

_________________
dsleepy47
N1491R

pitts_pilot(at)bellsouth.
Guest

Posted: Fri Aug 19, 2011 6:27 am Post subject: instrument panel overlay liquidation

Why not take them to your local plating shop and have them     alodined???

     Linn

     

     On 8/18/2011 6:01 PM, Gary Vogt wrote:     [quote]                I'm in the final steps of getting the instrument panel           overlays FAA-PMA approved as a direct replacement.  Problem           is, the FAA requires they go out with a chem film plating           (alodine) for corrosion resistance.  That means the 20 sets I           have left can't be used.

         

         

         Buy up as many as you want for $100/each including           shipping.  That's about $50 savings on each one.  Stock them           and sell them yourself.  Not sure how much the PMAd parts will           be.

       

        	  Quote: 	
		  

	
     [b]

deej(at)deej.net
Guest

Posted: Fri Aug 19, 2011 6:32 am Post subject: instrument panel overlay liquidation

On 08/18/2011 06:01 PM, Gary Vogt wrote:

 	  Quote: 	
		   I'm in the final steps of getting the instrument panel overlays FAA-PMA

 approved as a direct replacement.  Problem is, the FAA requires they go

 out with a chem film plating (alodine) for corrosion resistance.  That

 means the 20 sets I have left can't be used.

	
	




	Not that hard to alodine the parts.  Find someone that is building a

metal experimental and using alodine for corrosion protection, and ask

if you can do your panel parts in his bin.



Just a thought...



-Dj



-- 

Dj Merrill - N1JOV

Sportsman 2+2 Builder #7118 N421DJ - http://deej.net/sportsman/

Glastar Flyer N866RH - http://deej.net/glastar/

teamgrumman(at)yahoo.com
Guest

Posted: Fri Aug 19, 2011 10:06 am Post subject: instrument panel overlay liquidation

Yes, I could.  However, I have made a number of very small changes, mainly on the right half, to make it go together easier; I notched around the screws on the bottom of the glove box and moved the hobbs hole .015 inches up.  And, I raised the right edge of the left side by .050.  I sent the new drawings into the FAA.  So, these don't match the drawing I submitted.  

From: Linn Walters <pitts_pilot(at)bellsouth.net>

To: teamgrumman-list(at)matronics.com

Sent: Friday, August 19, 2011 7:24 AM

Subject: Re: TeamGrumman-List: instrument panel overlay liquidation



                    Why not take them to your local plating shop and have them     alodined???

     Linn

     

     On 8/18/2011 6:01 PM, Gary Vogt wrote:      	  Quote: 	
		                  I'm in the final steps of getting the instrument panel           overlays FAA-PMA approved as a direct replacement.  Problem           is, the FAA requires they go out with a chem film plating           (alodine) for corrosion resistance.  That means the 20 sets I           have left can't be used.

         

         

         Buy up as many as you want for $100/each including           shipping.  That's about $50 savings on each one.  Stock them           and sell them yourself.  Not sure how much the PMAd parts will           be.

       

        	  Quote: 	
		  



	
     http://www.matronics.com/Navigator?TeamGrumman-Lisllow" target="_blank" href="http://www.matronics.com/contribution">http========================


	




 [quote][b]

tscott165(at)cableone.net
Guest

Posted: Fri Aug 19, 2011 1:49 pm Post subject: instrument panel overlay liquidation

Gary,

 

Check went out today.

 

Scott Boyce

N28339

Boise, Id

 

From: owner-teamgrumman-list-server(at)matronics.com [mailto:owner-teamgrumman-list-server(at)matronics.com] On Behalf Of Gary Vogt

Sent: Thursday, August 18, 2011 9:43 PM

To: teamgrumman-list(at)matronics.com

Subject: Re: instrument panel overlay liquidation

 

To all interested,



 



Send a check for $100 (campaign contribution?) made payable to 



 



Gary L Vogt



2945 Bell Road #150



Auburn, CA  95603



 

From: Michael W. Meyer <michael(at)flightsked.com>

To: teamgrumman-list(at)matronics.com

Sent: Thursday, August 18, 2011 3:11 PM

Subject: Re: instrument panel overlay liquidation

Hi Gary,

 



I'll take one.

 



Thanks,



Michael



 



 



Michael W. Meyer



 



Tiger N74086



San Francisco, CA



 



michael(at)flightsked.com (michael(at)flightsked.com)

 

On Aug 18, 2011, at 3:01 PM, Gary Vogt wrote:





I'm in the final steps of getting the instrument panel overlays FAA-PMA approved as a direct replacement.  Problem is, the FAA requires they go out with a chem film plating (alodine) for corrosion resistance.  That means the 20 sets I have left can't be used.



 



Buy up as many as you want for $100/each including shipping.  That's about $50 savings on each one.  Stock them and sell them yourself.  Not sure how much the PMAd parts will be.



 	  Quote: 	
		     	




http://www.matronics.com/Navigator?TeamGrumman-List=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 



 

 	  Quote: 	
		    [/b][/b] 	
0 	  Quote: 	
		   	
1 	  Quote: 	
		   	
2 	  Quote: 	
		   	
3 	  Quote: 	
		   	
4 	  Quote: 	
		   	
5 	  Quote: 	
		   	
6 	  Quote: 	
		   	
7 	  Quote: 	
		   	
8 	  Quote: 	
		   	
9 	  Quote: 	
		   	
0 	  Quote: 	
		   	
1 	  Quote: 	
		   	
2

  [quote][b]

Doug Doty

Joined: 28 Oct 2011
Posts: 33
Location: Madison In

Posted: Fri Oct 28, 2011 7:53 am Post subject: Re: instrument panel overlay liquidation

What do you see the time frame for the pma/faa version availability.... I will be sending a check to you for one of these in the mean time. Try to get it out today. Doug...

_________________
1977 AA5B N28454, Fuel Totalizer, Lopresti Nose, Red Rudder Cap, 4 cyl. egt, stock otherwise.

teamgrumman(at)yahoo.com
Guest

Posted: Fri Oct 28, 2011 9:00 am Post subject: instrument panel overlay liquidation

The last conversation I had with the DER about a week ago said he was working out the final details and would be sending the package for the eyebrow and overlay in to the FAA for review.  

As soon as I get my back deck finished, I'll start bugging him again.

From: Doug Doty <39marinette(at)gmail.com>

To: teamgrumman-list(at)matronics.com

Sent: Friday, October 28, 2011 8:53 AM

Subject: Re: instrument panel overlay liquidation

 --> TeamGrumman-List message posted by: "Doug Doty" <39marinette(at)gmail.com (39marinette(at)gmail.com)>

What do you see the time frame for the pma/faa version availability.... I will be sending a check to you for one of these in the mean time. Try to get it out today. Doug...

--------

Boats and Planes

Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=356188#3=          - The TeamGrumman-List Email Forum -<sp;                     -================

Corls_panel.jpg

Description:

Filesize:

350.41 KB

Viewed:

9773 Time(s)

Display posts from previous:

	Matronics Email Lists Forum Index -> TeamGrumman-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum