 |
Matronics Email Lists Web Forum Interface to the Matronics Email Lists
|
View previous topic :: View next topic |
Author |
Message |
N9681L(at)dicombox.net Guest
|
Posted: Fri Oct 28, 2011 9:15 am Post subject: Another pic of 28454, recently purchased. Blast from the pa |
|
|
Gary,
How much trouble is it to route the PTT wires inside the yoke shaft?
The vinyl jacket is peeling from the coiled cord on 81L, and it needs to be replaced.
Curt
On 10/28/2011 9:44 AM, Gary Vogt wrote: [quote] I was hoping to see a pic of the interior. Needs a new fiberglass eyebrow and instrument panel overlays. . . . . smile. Could use some drilled yokes with the PTT wires inside the yoke shaft too.
It looks like you have 3 speakers. Not a big fan of speakers. Makes the glareshield more difficult to remove and install. Weighs more too.
My orange Cheetah had the same interior.
Here's my panel. Note the arm rest. It goes from the instrument panel to the baggage door. Comm jacks on the bottom of the arm rest front and rear.
Gary
From: Doug Doty <39marinette(at)gmail.com> (39marinette(at)gmail.com)
To: A TEAM GRUMMAN <teamgrumman-list(at)matronics.com> (teamgrumman-list(at)matronics.com)
Sent: Friday, October 28, 2011 7:49 AM
Subject: Another pic of 28454, recently purchased. Blast from the past
I had not previously seen this original interior color. Definatly that 70's thing.....
[b]
| - The Matronics TeamGrumman-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?TeamGrumman-List |
|
|
|
Back to top |
|
 |
teamgrumman(at)yahoo.com Guest
|
Posted: Fri Oct 28, 2011 10:17 am Post subject: Another pic of 28454, recently purchased. Blast from the pa |
|
|
I need to remove your yokes, send them to Dave to be drilled, strip and sandblast the yoke, get them powder coated, then install the wiring. Figure about $300 for the yokes plus installation.
From: Curt Johnson <N9681L(at)dicombox.net>
To: teamgrumman-list(at)matronics.com
Sent: Friday, October 28, 2011 10:12 AM
Subject: Re: Another pic of 28454, recently purchased. Blast from the past
Gary,
How much trouble is it to route the PTT wires inside the yoke shaft?
The vinyl jacket is peeling from the coiled cord on 81L, and it needs to be replaced.
Curt
On 10/28/2011 9:44 AM, Gary Vogt wrote: [quote] I was hoping to see a pic of the interior. Needs a new fiberglass eyebrow and instrument panel overlays. . . . . smile. Could use some drilled yokes with the PTT wires inside the yoke shaft too.
It looks like you have 3 speakers. Not a big fan of speakers. Makes the glareshield more difficult to remove and install. Weighs more too.
My orange Cheetah had the same interior.
Here's my panel. Note the arm rest. It goes from the instrument panel to the baggage door. Comm jacks on the bottom of the arm rest front and rear.
Gary
From: Doug Doty <39marinette(at)gmail.com> (39marinette(at)gmail.com)
To: A TEAM GRUMMAN <teamgrumman-list(at)matronics.com> (teamgrumman-list(at)matronics.com)
Sent: Friday, October 28, 2011 7:49 AM
Subject: TeamGrumman-List: Another pic of 28454, recently purchased. Blast from the past
I had not previously seen this original interior color. Definatly that 70's thing.....
[b]
| - The Matronics TeamGrumman-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?TeamGrumman-List |
|
|
|
Back to top |
|
 |
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|