Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Need some help guys.

Matronics Email Lists Forum Index -> KIS-List

View previous topic :: View next topic

Author Message

uss_bravo@hotmail.com

Joined: 27 Nov 2013
Posts: 5
Location: Mira Loma CA.

Posted: Wed Jul 16, 2014 1:46 am Post subject: Need some help guys.

Hey guys my name is Siddartha Bravo. I own a  TR-1. SN#43, I'm not the original owner nor the original builder. The reason I'm here is because, I was in the process of upgrading my TR-1,  paint and body is almost done, engine, work perfectly but I want more power  an O-320 will be my choice.  instruments have a g3x  in hand. But anyways  do to some complications. I won't be able to do so.  I'm currently in Korea and my beloved  "little B" is in California . I'm looking for some help to finish my project  so if you  are interested or know some one please. Let me know or please pas on my information.  Also I will consider offers( send me an e-mail)  it looks like  I'm going to be in Korea for some time. I would rather see my plane  up in the air than sitting around for that long. 



Regards 

Siddartha Bravo



Uss_bravo(at)hotmail.com

- The Matronics KIS-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?KIS-List

mark_trickel

Joined: 13 Dec 2011
Posts: 101
Location: Philadelphia, PA, USA

Posted: Thu Jul 17, 2014 5:58 am Post subject: Re: Need some help guys.

Hello Sid,



Great to hear from you, and I am glad to see this TR-1 is in good hands.



I made a couple inquiries for you, and both have replied to me. The first is Planemakers in Florida. They said this is the kind of work they do, and they are taking a look at Robert R's website to familiarize themselves with the KIS project. They will get back to me.



The second inquiry was to Rich's former employee Chuck H. He replied while they are not set up to do this kind of work he knows of a few shops that could do this work for you. He asked for more details, and he will ask around for you, and get back to me. Chuck and Steve were very involved in the MX aerobatic airplane project where they tooled, molded, and assembled airframes that were then sent out to other shops for completion.



I will keep you advised as to what I learn.



Regards, Mark T.



Randy - not to speak for Sid but he's in a way different time zone -the craft is located in Fresno.

- The Matronics KIS-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?KIS-List

uss_bravo@hotmail.com

Joined: 27 Nov 2013
Posts: 5
Location: Mira Loma CA.

Posted: Thu Jul 17, 2014 6:27 am Post subject: Need some help guys.

Hey Mark, 



Thanks for the help. And as soon as you get more info let me know please.  Just a small correction here. My aircraft is located at my home in Mira Loma CA. I' m currently in Camp Humphreys. In South Korea.  If you or anyone else needs more info about my TR-1 I'll be more than glad to expand on it.



Regards 

Sid



 	  Quote: 	
		   On Jul 17, 2014, at 22:59, "mark_trickel" <marktrickel(at)gmail.com> wrote:

 

 

 

 Hello Sid,

 

 Great to hear from you, and I am glad to see this TR-1 is in good hands.

 

 I made a couple inquiries for you, and both have replied to me. The first is Planemakers in Florida. They said this is the kind of work they do, and they are taking a look at Robert R's website to familiarize themselves with the KIS project. They will get back to me.

 

 The second inquiry was to Rich's former employee Chuck H. He replied while they are not set up to do this kind of work he knows of a few shops that could do this work for you. He asked for more details, and he will ask around for you, and get back to me. Chuck and Steve were very involved in the MX aerobatic airplane project where they tooled, molded, and assembled airframes that were then sent out to other shops for completion.

 

 I will keep you advised as to what I learn.

 

 Regards, Mark T.

 

 Randy - not to speak for Sid but he's in a way different time zone -the craft is located in Fresno.

 

 

 

 

 Read this topic online here:

 

 http://forums.matronics.com/viewtopic.php?p=426833#426833

- The Matronics KIS-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?KIS-List

galinhdz(at)gmail.com
Guest

Posted: Thu Jul 17, 2014 12:11 pm Post subject: Need some help guys.

And if they need to see a KIS up close and/or some help, I am just up a ways from Sarasota.

On Thu, Jul 17, 2014 at 10:27 AM, SIDDARTHA BRAVO <uss_bravo(at)hotmail.com (uss_bravo(at)hotmail.com)> wrote:

  [quote]--> KIS-List message posted by: SIDDARTHA BRAVO <uss_bravo(at)hotmail.com (uss_bravo(at)hotmail.com)>

   

 Hey Mark,

 

 Thanks for the help. And as soon as you get more info let me know please.  Just a small correction here. My aircraft is located at my home in Mira Loma CA. I' m currently in Camp Humphreys. In South Korea.  If you or anyone else needs more info about my TR-1 I'll be more than glad to expand on it.

   

 Regards

 Sid

 

 > On Jul 17, 2014, at 22:59, "mark_trickel" <marktrickel(at)gmail.com (marktrickel(at)gmail.com)> wrote:

 >

 > --> KIS-List message posted by: "mark_trickel" <marktrickel(at)gmail.com (marktrickel(at)gmail.com)>

 >

 > Hello Sid,

 >

 > Great to hear from you, and I am glad to see this TR-1 is in good hands.

 >

 > I made a couple inquiries for you, and both have replied to me. The first is Planemakers in Florida. They said this is the kind of work they do, and they are taking a look at Robert R's website to familiarize themselves with the KIS project. They will get back to me.

   >

 > The second inquiry was to Rich's former employee Chuck H. He replied while they are not set up to do this kind of work he knows of a few shops that could do this work for you. He asked for more details, and he will ask around for you, and get back to me. Chuck and Steve were very involved in the MX aerobatic airplane project where they tooled, molded, and assembled airframes that were then sent out to other shops for completion.

   >

 > I will keep you advised as to what I learn.

 >

 > Regards, Mark T.

 >

 > Randy - not to speak for Sid but he's in a way different time zone -the craft is located in Fresno.

 >

 >

 >

 >

 > Read this topic online here:

 >

 > http://forums.matronics.com/viewtopic.php?p=426833#426833

 >

 >

 >

 >

 >

 >

 >

 >

 >

 >

 

 

 ===========

  target="_blank">http://www.matronics.com/Navigator?KIS-List

 ===========

 MS -

 k">http://forums.matronics.com

 ===========

 e -

           -Matt Dralle, List Admin.

 t="_blank">http://www.matronics.com/contribution

 ===========

 

 

 

 



[b]

- The Matronics KIS-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?KIS-List

Display posts from previous:

	Matronics Email Lists Forum Index -> KIS-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum