Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Replace wire strippers in the 10-22 AWG range

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List
View previous topic :: View next topic  
Author Message
bridgetkeble



Joined: 23 Jun 2021
Posts: 1

PostPosted: Thu May 16, 2024 2:18 am    Post subject: Replace wire strippers in the 10-22 AWG range Reply with quote

I would like to replace my wire stripper that has recently failed. I am interested in a tool that can strip wires in the range 10-22 AWG and possibly smaller wires as the ones sometimes used in avionics and instruments. I would buy 2 strippers, if necessary.

Could somebody make a recommendation for a good quality, reliable tool?

Thanks.


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
View user's profile Send private message
halbenjamin101(at)gmail.c
Guest





PostPosted: Thu May 16, 2024 4:10 pm    Post subject: Replace wire strippers in the 10-22 AWG range Reply with quote

Hi Bridget,

I used Klein Tools “curve strippers” for hard to reach places and larger wires. I think it does 10-22.

For the small wires, when I had plenty of room I used “ Ideal” mechanical type strippers. I think they went down to #24. They were easier to use on the tiny wires.

Hope this helps!

Hal Benjamin
RV4 700+ hours

Sent from my iPad

Quote:
On May 16, 2024, at 6:22 AM, bridgetkeble <bridgetkeble(at)gmail.com> wrote:



I would like to replace my wire stripper that has recently failed. I am interested in a tool that can strip wires in the range 10-22 AWG and possibly smaller wires as the ones sometimes used in avionics and instruments. I would buy 2 strippers, if necessary.

Could somebody make a recommendation for a good quality, reliable tool?

Thanks.




Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=513588#513588











- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
Eric Page



Joined: 15 Feb 2017
Posts: 245

PostPosted: Fri May 17, 2024 7:47 am    Post subject: Re: Replace wire strippers in the 10-22 AWG range Reply with quote

I'll second the recommendation for the Ideal Industries StripMaster tool. You can buy one tool and multiple sets of dies to strip most common wire gauges.

Here are the part numbers and gauge ranges for the tools and blade sets. [My apologies for the formatting of this information; this ancient forum software makes it impossible to post tabular data in a way that's easily readable both online and in the email digest.]

Tool P/N, Blade Set P/N, AWG Stripped
45-090, L-4419, 8/10/12
45-091, L-4420, 10/12/14/16/18
45-092, L-4421, 10/12/14/16/18/20/22
45-093, L-4422, 14/16/18/20/22
45-097, L-4994, 16/18/20/22
45-098, L-5361, 20/22/24/26/28/30
45-099, L-8763, 8/10/16/18

Basically, you want to buy either tool 45-090 -or- 45-092 -or- 45-098, then buy the blade sets corresponding to the other two. You'll have everything covered from 8 to 30 AWG.


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
View user's profile Send private message
cjfortin



Joined: 05 Jan 2013
Posts: 4

PostPosted: Sat May 18, 2024 8:54 am    Post subject: Re: Replace wire strippers in the 10-22 AWG range Reply with quote

I went through the Navy micro-miniature repair school back in the 70s and we were only allowed to use a die type blade stripper for Tefzel wire. This was to prevent any possible nicking of the wire strands. These Ideal strippers are not cheap. They're good for 16-26 AWG.

45-1610
45-1976
45-2133

I have the 45-1976 they work well.


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group