  | 
				Matronics Email Lists Web Forum Interface to the Matronics Email Lists   
				 | 
			 
		 
		 
	
		| View previous topic :: View next topic   | 
	 
	
	
		| Author | 
		Message | 
	 
	
		alfolavf(at)online.no Guest
 
 
 
 
 
  | 
		
			
				 Posted: Sun Feb 19, 2006 11:43 am    Post subject: Defroster-system? | 
				     | 
			 
			
				
  | 
			 
			
				Hi all!
 
 Thanks for the inputs on the new wing tip landing lights! I'll go for the LE landing lights then.
 
 I've another one for you:
 In addition to the cabin heat, I also need a way to send warm air to the windshield, in other words a defrost system.
 
 I was thinking that maybe I could mount an "Y" coupling on the hose supplying cabin heat and route warm air from the "Y" intersection to the windshield, if I cut out some long slots in the area just below the windshield. (almost like a car)
 
 How has other builders living in cold areas solved this?
 While I'm at it: 
 
 I saw that there's some "hatches" for extra fresh air that can be installed in the forward portion of the fuselage which can be used on warm days.
 Anyone have any experience with this?
 Is the fresh air intakes which comes with the kit inadequate?
 
 Here I'm asking RV-operaters who's flying in weather conditions like Norway: summer temps mostly around 20-25 degrees celcius (approx 65-75 fahrenheit)
 
 Best regards Alf Olav Frog / Norway
 
  |  | - The Matronics RV7-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?RV7-List |  
  |  
 
 
 
 
  | 
			 
		  | 
	 
	
		| Back to top | 
		 | 
	 
	
		  | 
	 
	
		N67BT(at)aol.com Guest
 
 
 
 
 
  | 
		
			
				 Posted: Sun Feb 19, 2006 5:05 pm    Post subject: Defroster-system? | 
				     | 
			 
			
				
  | 
			 
			
				 	  | Quote: | 	 		  I used a    small computer type fan mounted to the louvered cabin heat panel.  Not    flying yet so I don't know how well it will work.  I used round aluminum    flanges at both ends of the SCAT duct.   See:   http://users.aol.com/n67bt/defrostfan.htm
     
    Bob Trumpfheller
    <<I've another one for you:
 In addition to the cabin heat, I    also need a way to send warm air to the windshield, in other words a defrost    system.
 
 I was thinking that maybe I could mount an "Y" coupling on the    hose supplying cabin heat and route warm air from the "Y" intersection to the    windshield, if I cut out some long slots in the area just below the    windshield. (almost like a car)
 
 How has other builders living in cold    areas solved this?>>
    
  | 	  
  
   
 
  |  | - The Matronics RV7-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?RV7-List |  
  |  
 
 
 
 
  | 
			 
		  | 
	 
	
		| Back to top | 
		 | 
	 
	
		  | 
	 
	
		shaun-s(at)sbcglobal.net Guest
 
 
 
 
 
  | 
		
			
				 Posted: Sun Feb 19, 2006 5:54 pm    Post subject: Defroster-system? | 
				     | 
			 
			
				
  | 
			 
			
				i wish to opt out
 
 N67BT(at)aol.com wrote:   	  | Quote: | 	 		         	  | Quote: | 	 		  I used a small computer type fan mounted to the louvered cabin heat panel.  Not flying yet so I don't know how well it will work.  I used round aluminum flanges at both ends of the SCAT duct.  See:   http://users.aol.com/n67bt/defrostfan.htm
    
   Bob Trumpfheller
   <<I've another one for you:
 In addition to the cabin heat, I also need a way to send warm air to the windshield, in other words a defrost system.
 
 I was thinking that maybe I could mount an "Y" coupling on the hose supplying cabin heat and route warm air from the "Y" intersection to the windshield, if I cut out some long slots in the area just below the windshield. (almost like a car)
 
 How has other builders living in cold areas solved this?>>
   
  | 	  
   
    
  | 	 
 
 
  |  | - The Matronics RV7-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?RV7-List |  
  |  
 
 
 
 
  | 
			 
		  | 
	 
	
		| Back to top | 
		 | 
	 
	
		  | 
	 
	
		rv6capt(at)pacificcoast.n Guest
 
 
 
 
 
  | 
		
			
				 Posted: Mon Feb 20, 2006 7:36 am    Post subject: Defroster-system? | 
				     | 
			 
			
				
  | 
			 
			
				I live in Canada and have no problems with heat or need for a defroster. 
 The coldest that I  have flown in has only been -23c.
 
 Cheers
 Norman
 Shaun Smith wrote:
 
  	  | Quote: | 	 		   i wish to opt out
 
  */N67BT(at)aol.com/* wrote:
 
          I used a small computer type fan mounted to the louvered cabin
          heat panel.  Not flying yet so I don't know how well it will
          work.  I used round aluminum flanges at both ends of the SCAT
          duct.
 
          See:   http://users.aol.com/n67bt/defrostfan.htm
           
          Bob Trumpfheller
 
          <<I've another one for you:
          In addition to the cabin heat, I also need a way to send warm
          air to the windshield, in other words a defrost system.
 
          I was thinking that maybe I could mount an "Y" coupling on the
          hose supplying cabin heat and route warm air from the "Y"
          intersection to the windshield, if I cut out some long slots
          in the area just below the windshield. (almost like a car)
 
          How has other builders living in cold areas solved this?>>
       
 
 | 	 
 
 
  |  | - The Matronics RV7-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?RV7-List |  
  |  
 
 
 
 
  | 
			 
		  | 
	 
	
		| Back to top | 
		 | 
	 
	
		  | 
	 
	
		rv-9a-online(at)telus.net Guest
 
 
 
 
 
  | 
		
			
				 Posted: Mon Feb 20, 2006 9:28 am    Post subject: Defroster-system? | 
				     | 
			 
			
				
  | 
			 
			
				Norman Younie wrote:
  	  | Quote: | 	 		   
  
  I live in Canada and have no problems with heat or need for a defroster. 
  The coldest that I  have flown in has only been -23c.
  
  Cheers
  Norman
  
 
 | 	  
 Geez, Norman, Victoria doesn't really count as a cold climate!  Your 
 lucky if you get frost for a week a year.
 
 I assume, though that you make trips to the interior where it's colder.
 
 By the way, are your daffodils blooming yet  ?
 
 Vern Little
 9A (White Rock)
 
 do not archive
 
  |  | - The Matronics RV7-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?RV7-List |  
  |  
 
 
 
 
  | 
			 
		  | 
	 
	
		| Back to top | 
		 | 
	 
	
		  | 
	 
	
		rv6capt(at)pacificcoast.n Guest
 
 
 
 
 
  | 
		
			
				 Posted: Mon Feb 20, 2006 10:00 am    Post subject: Defroster-system? | 
				     | 
			 
			
				
  | 
			 
			
				My daffodils are all done for the year, although there are still lots of 
 them around. The trees in town are all in full bloom. I saw a bunch of 
 roses in full bloom yesterday and the tulips are blooming. Yes I fly 
 across to Alberta and as you know it gets cold there.
 
 Cheers
 
 Vern Little wrote:
 
  	  | Quote: | 	 		   
 
  Norman Younie wrote:
 
 > 
 >
 > I live in Canada and have no problems with heat or need for a 
 > defroster. The coldest that I  have flown in has only been -23c.
 >
 > Cheers
 > Norman
 >
 
  Geez, Norman, Victoria doesn't really count as a cold climate!  Your 
  lucky if you get frost for a week a year.
 
  I assume, though that you make trips to the interior where it's colder.
 
  By the way, are your daffodils blooming yet  ?
 
  Vern Little
  9A (White Rock)
 
  do not archive
 
  http://www.matronics.com/Navigator?RV7-List
 
 
 
 | 	 
 
 
  |  | - The Matronics RV7-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?RV7-List |  
  |  
 
 
 
 
  | 
			 
		  | 
	 
	
		| Back to top | 
		 | 
	 
	
		  | 
	 
	
		cgreimer(at)mts.net Guest
 
 
 
 
 
  | 
		
			
				 Posted: Sun Feb 26, 2006 12:39 pm    Post subject: Defroster-system? | 
				     | 
			 
			
				
  | 
			 
			
				 	  | Quote: | 	 		   I've another one for you:
  In addition to the cabin heat, I also need a way to send warm air to the 
  windshield, in other words a defrost system.
 
  I was thinking that maybe I could mount an "Y" coupling on the hose 
  supplying cabin heat and route warm air from the "Y" intersection to the 
  windshield, if I cut out some long slots in the area just below the 
  windshield. (almost like a car)
 
  How has other builders living in cold areas solved this?
 
 | 	  
 I regularly fly in cold temps with my RV-6. I have the dual muffin fan 
 defroster setup with no hot air feed. I run the fans at anything below 10C
 
 0C and above - canopy and windshield stay relativly clear at all times.
 
 0C to -10C    - canopy will fog up during startup and taxi but fans keep the 
 windshield clear. Once in the air the rest of the canopy will quickly clear 
 and stay that way until on the ground
 
 -10 to -20C   - canopy and windshield will fog up during startup but usually 
 the fans will keep a small viewing area clear. I need to rub the frost off 
 the side windows to see adequately during taxi and takeoff. Once in the air 
 the canopy gradually clears.
 
 -30C and below - the heating/defrost system has a hard time coping but with 
 cruise power the windshield will become mostly clear. The side windows 
 require constant manual clearing.
 
 This is all with one person on board as I don't carry a lot of passengers in 
 winter.
 
 One critical thing is not to overheat yourself and start sweating before 
 entering the cockpit. If I need to clear snow from the hangar or anything 
 physical, I'll cool down for awhile before getting in. I usually keep the 
 canopy cracked until the engine is running, then I open the air vents to 
 keep the air flowing until I'm ready for takeoff. You dont get any engine 
 heat at idle anyway.
 
 Curt
 RV-6 C-GACR
 375 hours
 Winnipeg, Canada
 
  |  | - The Matronics RV7-List Email Forum - |  |   |  Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
 
  http://www.matronics.com/Navigator?RV7-List |  
  |  
 
 
 
 
  | 
			 
		  | 
	 
	
		| Back to top | 
		 | 
	 
	
		  | 
	 
	
		 | 
	 
 
  
	 
	    
	   | 
	
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
  | 
   
 
  
Powered by phpBB © 2001, 2005 phpBB Group
  
		 |